Lexcent 3D printer ABS filament offers great quality at good price. Manufactured its 3D printer filament under tight tolerances, this filament can work with a wide extruder temperature range, which helps to prevent extruder nozzle problems and yields smooth 3D models. Lexcent 3D printer filament is compatible with the MakerBot printers, as well as other 3D printers which use 1.75mm ABS filament.
1. Keep extruding more than 5mins after changing the filaments to avoid remaining.
2. Adjust the space between the build platform and extruder nozzle if the printed model base was curled up.
3. Make sure the printer is working in a sealed environment with a stable warm temperature.
4. Please replace the covering Kapton Tap while the printed model’s base was curled up.
Easy control, low shrinkage helps to keep the printed model in shape.
Recommended nozzle temperature is 230 degrees Centigrade (446 degrees Fahrenheit)
Recommended to cover the build platform with Kapton Tap
Use with heated build platform, recommended to set it at 110 degrees Centigrade (230degrees Fahrenheit)
Compatible with Reprap, MakerBot and Afinia, as well as other 3D printers the use 1.75mm filament and operate within the same extruder temperature range